System

Over Rafter

Between and Under Rafter

Build your energy saving roof with termPIR®

Energy-efficient construction uses intelligent technologies that allow to achieve high thermal comfort and create a building characterized by low energy consumption and low operating costs. TherPIR® panels provide more effective thermal insulation compared to other building materials such as mineral wool or polystyrene. they allow for cost-effective, long-term and safe use of a house or flat.

AMENDED VALUE FOR DIFFERENT MANUFACTURERS * termPIR® AL, termPIR® AGRO AL, termPIR® AGRO P ** termPIR® ETX, termPIR® WS, termPIR® WG GK, termPIR® PK, termPIR® BWS, termPIR® BT

Thermal insulation calculator

LOADING ....
Type of insulation
Insulation thickness
Position

{{wynik}} [W / m2K] U max

The required thermal conduction coefficient has been reached.
From 31 December, the required ratio will be 0,15.
* termPIR® -termPIR® AL, termPIR® AGRO AL, termPIR® AGRO P
** termPIR®-termPIR® ETX, termPIR® WS, termPIR® WG GK, termPIR® PK, termPIR® BWS, termPIR® BT

How to assemble termPIR® insulation boards ?

Post-rafter installation

1

Rafter

2

TermPIR® AL Insulation Boards

3

Windproof foil / vapor permeable membrane

4

Patch

5

Counter-laths

6

Roofing

7

Aluminum tape

The dedicated board for the over-rafter system is an insulating board termPIR® ALthat minimizes heat loss through thermal bridges

Under-rafter and inter-rafter installation

Podkrokwiowy
1

TermPIR insulation board®WS GK

2

Aluminum tape

3

TermPIR insulation board®AL

4

are new to

5

Windproof foil / vapor permeable membrane

6

Patch

7

Counter-laths

8

Roofing

A dedicated board for the under-rafter system is an insulation board termPIR® WS GKthat minimizes heat loss through thermal bridges

Why insulate with termPIR® boards ?

They are excellent thermal insulation - λD = 0,022 W / m * K

an 120 mm thick board is enough, and in homes
energy-saving and passive 150 mm

They are hard and resistant to damage - σ₁₀ = 150 kPa
they do not change their shape in time (they do not settle), and at the same time are light. Thick boards 120 mm it is only 3,6 kg / m².
They are waterproof - absorbability below 2%
forget about replacing the damp insulation. An additional advantage is the possibility of a year-round assembly
They are resistant to factors biological and chemical

you do not have to share the house with rodents and insects, either
worry about mushrooms or mold

They have increased resistance to fire
they are material self-extinguishingthat is, not supporting the fire
Simple assembly

you can do it yourself.

Recommended use of termPIR boards®