PIR Insulation Board termPIR® ETX
Unbeatable solution for increasing energy efficiency of your building!
The termPIR® ETX insulation boards comprise of a PIR rigid foam thermal insulation core. Covered with a gas-permeable cladding (ETX), dedicated to external walls in the ETICS system with a thickened structure made of glass veil. The above boards should be fixed to the wall with the printed side, otherwise there may be problems with the durability of the façade
Logistics: 1200 mm x 600 mm
for 20 ≤ d < 80 mm λD = 0,026
for 80 ≤ d ≤ 120 mm λD = 0,025
for 120 < d ≤ 250 mm
Milled edges facilitate assembly and increase thermal insulation.
01. FIT (flat milling from 30-50 mm), 02. LAP (stepwise milling from 30-250 mm)* - lack, 03. TAG (tongue and groove from 80-250 mm)*
* dimensions of boards with joint types are 2 to 4 % smaller
Loading and Unloading is carried out manually by single packages or using a fork lift provided with a grab for some packages. In case of longer, not typical panels, the relevant equipment or more persons should be provided for unnloading. In this way, panel breaking or damage can be prevented.
Boards are prone to damage, also when they are in the packaging. It is not allowed to throw or roll the packages. The transport of thermal insulation boards should be executed by trucks intended for this purpose. Upon the reception of insulation boards, the number and quality of the delivered commodities should be checked. Discrepancies should be described in the shipping list and reported to the manufacture immediately. Possible damage to boards on the truck should be documented with photographs.
- packagesshould be stored in a dry place; they should not be put directly on the ground, but supports should be used,
- do not place heavy objects on the panels, this can cause serious damage,
- protect from weather conditions,
- single boards should be transported vertically so as to avoid their breaking.
termPIR® thermal insulation boards are packed in packages enabling their handling. The typical package height is 500 mm.The number of panels depends on its thickness.
In the table belowe are the basic logistics parameters of termPIR® products. Detailed information has been included in the LOGISTICS CARDS.
Why is it worth?
λD = 0,025 - 0,027 W/mk
All you need is a 160 mm plate (applies to a partition in the external wall) to meet the technical conditions for 2021
They do not distort during use. They are light - boards 120 mm thick weight only ważą 3,6/kg/m
You don't have to share the house with rodents and insects, or worry about fungi or mold.
They don't keep the fire burning
You don't need a specialist for assembly
Boards can be installed in one or multiple layers in an interlocking manner. Install mechanically with fasteners, glue or suspend - depending on the kind of substructure and type of waterproofing.Download file